Well, I bought your sealer
Well, I bought your sealer repair kit to fix a cellar water wall crack at my sister's house. Everything went okay following your instructions. There was a previous surface repair attempt made several years ago that did not work. What I did was drill a hole where each surface port was to be placed. I used a 3/16" drill to a depth of about 1". The reason was from the other repair. I wanted to make sure the crack at the surface was not plugged. Also, I took a piece of drill rod about 6" in length with a diameter of .159. I put the rod through the surface port, extending it past it. Inserted it in the drilled holes I made. I slid the surface port forward. It acted as an alignment gauge. What I did not like about the kit is the epoxy used to attach the surface ports and seal the surface crack. The working time to use it is way too short. I realize you need something that works fast to hold the ports in place. The bottom line is, did the repair work? There has to be a heavy downpour of rain or after winter with a spring thaw to find out.
0 comments
Replying to Michael K
The comment must be at least 10 characters.